BFLJD - MOBIL AVREX S TURBO 260

  • MSDS: BFLJD
  • Manufacturer: MOBIL OIL CORP
  • Product Name: MOBIL AVREX S TURBO 260
  • National Stock Number: 9150-00-681-5999
Product Identification

Product ID:MOBIL AVREX S TURBO 260
MSDS Date:08/16/1990
FSC:9150
NIIN:00-681-5999
MSDS Number: BFLJD

Responsible Party
MOBIL OIL CORP
3225 GALLONS ROAD
FAIRFAX, VA 22037-0001
US

Emergency Phone: 609-737-4411,CHEMTREC 800-424-9300

Info Phone: 800-662-4525

Cage: 3U728

Contractor
MOBIL OIL CORP, NORTH AMERICAS MARKETING AND REFINING
FAIRFAX, VA 22037 US

Telephone: 800-662-4525/ 856-224-4644

Cage: 3U728

Ingredients

SYNTHETIC OILS

OSHA PEL 5MG/M*3(OIL MIST)

ACGIH TLV: 5MG/M*3(OIL MIST)


ADDITIVES AND OTHER INGREDIENTS


TRIORTHOCRESYL PHOSPHATE

CAS: 78-30-8

RTECS: TD0350000

Fraction By Weight: <0.02%

OSHA PEL S, 0.1 MG/M3

ACGIH TLV: S, 0.1 MG/M3; 9192


TRICRESYLPHOSPHATE

CAS: 1330-78-5

RTECS: TD0175000

Fraction By Weight: 2.99%

Hazards

LD50 LC50 Mixture:>5G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-INGESTION:HARMFUL. NERVOUS
SYSTEM & GI SYSTEM DISORDERS, NUMBNESS AND MUSCULAR CRAMPS.
INHALATION:NO ADVERSE HEALTH EFFECTS EXPECTED. EYE: IRRITATION.
SKIN: NOT NORMALLY EXPECTED TO CAUSE ILL EF FECTS.
CHRONIC-PROLONGED/REPEATED SKINCONTACT MAY CAUSE
IRRITATION,DERMATITIS.
Explanation of Carcinogenicity:THE COMPONENTS OF THIS PRODUCT HAVE NOT
SHOWN ANY EVIDENCE OF BEING CARCINOGENIC.
Effects of Overexposure:PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE
SKIN IRRITATION. EYE CONTACT MAY CAUSE EYE IRRITATION. INGESTON:GI
& NERVOUS SYSTEM DISORDERS.
Medical Cond Aggravated by Exposure:PERSONS WITH A SKIN DISORDER SHOULD
AVOID PROLONGED CONTACT WHEN HANDLING OR USING THIS PRODUCT.

First Aid

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER.
GET MEDICAL ATTENTION IF IRRITATION PERSISTS. INHALATION: REMOVE TO
FRESH AIR & RESTORE BREATHING IF NECESSARY. GET MEDICAL ATTENTION.
EYE : IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. INGESTION: GET IMMEDIATE
MEDICAL ATTENTION. INDUCE VOMITING. NOTHING BY MOUTH IF
UNCONSCIOUS.

Fire Fighting

Flash Point Method:PMCC
Flash Point:455F,235C
Lower Limits:0.6
Upper Limits:7.0
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.

Accidental Release

Spill Release Procedures:RECOVER FREE PRODUCT, OR ABSORB WITH
DIATOMACEOUS EARTH OR OTHER INERT MATERIAL. STORE IN APPROPRIATE
CONTAINER FOR DISPOSAL. KEEP PRODUCT OUT OF SEWERS AND WATERCOURSES
BY DIKING OR IMPOUNDING. MINIM IZE SKIN CONTACT AND BREATHING
VAPORS.

Handling

Handling and Storage Precautions:AVOID STORAGE NEAR OPEN FLAME OR OTHER
SOURCES OF IGNITION,AND STRONG OXIDANTS.KEEP CONTAINERS CLOSED.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE. DO NOT PRESSURIZE,
CUT, WELD OR EXPOSE TO HEAT, FLAME, STATIC ELECTRICITY, OR OTHER
SORCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY.

Exposure Controls

Respiratory Protection:USE SUPPLIED-AIR RESPIRATORY PROTECTION IN
CONFINED OR ENCLOSED SPACES, IF NEEDED.
Ventilation:SUFFICIENT TO MAINTAIN ATMOSPHERE BELOW TLV LIMIT.
Protective Gloves:NEOPRENE, NITRILE, OR POLYVINYL ALCOHOL
Eye Protection:USE CHEMICAL SAFETY GOGGLES
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER. CHEMICALLY
RESISTANT BOOTS AND APRONS RECOMMENDED.
Work Hygienic Practices:DO NOT TAKE INTERNALLY. AVOID SKIN CONTACT.
WASH SKIN AFTER USING PRODUCT. DO NOT EAT, DRINK OR SMOKE IN WORK
AREA.
Supplemental Safety and Health
NOTE FORMULATION CHANGE IN THIS PRODUCT. WASH OR TAKE SHOWER IF GENERAL
CONTACT OCCURS. REMOVE GREASE-SOAKED CLOTHING AND LAUNDER BEFORE
REUSE. DISCARD CONTAMINATED LEATHER GLOVES AND SHOES. IF USED I N
APPLICATIONS WHERE MIST MAY BE GENERATED, OBSERVE A TWA/PEL OF 5
MG/M3 FOR MINERAL OIL MIST.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:0.1
Spec Gravity:1
Viscosity:27.8 CS @100F
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID,MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREMELY HIGH TEMPERATURES
Hazardous Decomposition Products:FUMES,SMOKE., OXIDES OF CARBON,
NITRGEN AND SULFUR.

Disposal

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.